DC Digital Blue + Red LED Amp Volt Combo Meter 20V 50A
This meter is compatible with voltage and current detection.
Measure Positive and Negative current(-49.9~+49.9A).
Good linearity.
Small Temperature Drift.
adopts ultra-bright blue LED display.
Automatically adjust its displaying brightness, it doesn't dazzling in night time.
Low Power consumption.
Easy install.
This item Should be powered by ISOLATED power. Please add an isolated power module if we want to power the meter by the same power being measured, or will BURN the meter.
Power the meter by independent source | Power the meter by isolated power module |
Product Description:
DC Amp & Volt Combo meter | |
DC6-24V | |
Running current | <80mA |
Measuring range | DC0~±19.99V/0~±49.9A |
Type | 7 segment 3-1/2 Blue + Red LED |
Sampling rate | 2-3 readings per second |
Accuracy | ± 0.2% FS |
Resolution | 0.01V/0.1A |
Dimensions | 79mm×43mm×25mm |
Size of mounting hole | 76mm×39.5mm |
Meter Weight | 40g |
Regulator weight | 60g |
Ideal for use with:
Use in cars, boats (ISOLATED power required!) planes and Testing Devices for measuring voltage and current.
Is widely used in equipment and electromechanical device.
Monitoring battery & electrical system.
Package:
Blue & Red LED digital panel meter.
5 pin pig tail connection cables.
Shunt (50A 75mv)
Note:
DC power is needed to power the meter.
D.C. positive and negative poles should be connected correctly!
Load and Shunt must be used for the meter to read Amps.
Shunt must be connected between the Negative terminal and Load.