Robot szervó 360°, teljesen körbe forgó RC robotika
RC Robots DS04-NFC 360 Degree Continuous Rotation Servo DC Geared Motor
Cikkszám:
#3636
100% magyar cég!
100% magyar raktár!
    3,490
Ft
   
(Bruttó) Ár: 
2,990
Ft
(Bruttó) Ár: |
3,490 Ft
|
|
2,990 Ft |
Raktáron
Hagyományos RC szervó jellel vezérelhető, viszont a szervó teljesen körbe-körbe forog, a szervó jel a forgási sebességet határozza meg, mindkét irányba.
Sztenderd méretű RC robot szervó.
Rendelhető robot kerékkel együtt is:
Description:
The signal terminal needs to be input with one 50 HZ square wave, then the duration of high level pulse, which is used to control signal cycle, can control speed and forward/backward rotation as well as stalling. The duration of high level corresponds to a speed. When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is the fastest when it is 1ms, the higher the lower, servo will stop rotating when reaching 1.5ms). When high level is 1.5 ~2ms, the servo rotates backward(The servo stops rotating when reaching 1.5ms, when the duration is closer to 2ms, the closer, the faster. The backward rotation speed, the fastest when reaching 2ms)
This servo carries meso-position adjustment potentiometer(it can only be seen by peeling off the outer cover and circuit board). We can set high level pulse at 1.5ms to observe that whether servo stops rotating. If it doesn’t stop rotating, we keep adjusting the potentiometer until it does.
Features:
Applies to model airplane / Model car / robot
Torque: 5.5kg/cm (at 4.8V)
Speed: 0.22sec/60°(at 4.8V)
Working voltage: 4.8v-6v
Temperature: 0℃-60℃
Current: < 1000mA
Weight: 38g
Dimensions: 40.8 x 20 x 39.5 mm
Kapcsolódó termékek
Kapcsolódó cikkek
Vélemények (küldje be Ön is véleményét)
Figyelem, a képek csak illusztrációk, a kiegészítők, a színek és a csomagolás eltérhet.
A termékleírásban esetlegesen előforduló hibákért felelősséget nem vállalunk. Ha a paraméterekben nem biztos, ellenőrizze a gyártónál.