4 kerekű autó, RC robotplaform
Nagy teherbírás, egyszerű ráépíthetőség, hosszú menetidőre is tervezhető, ütköző.
Fém fogaskerekek.
Opcionálisan kétféle áttételezéssel rendelhető: lassú (nagyobb teherbírású), gyors (hosszabb áttétellel)
Megfelelő LiIon vagy Lipo cellákkal szerelve a működési idő 1 óra felett is lehet.
2 felső lemezzel, melyre könnyen csavarozhatóak a vezérlő panelek, rögzíthetők szenzorok, az akku, vagy az akku tartó, pl célszerű használni műanyag 18650 méretű LiIon akkutartókkal.
Figyelem: a videóban és plusz képeken szereplő szenzorok, mikrovezérlők és alkatrészek nem tartozékai a robot alap platformnak, ezek a felhasználók által épített kész robotok. A Robot így nem egy konkrét felhasználásra alkalmas, tetszőlegesen felszerelhető, programozható. A KIT csak a robot platformot tartalmazza alvázzal, motorral, szervóval.
Features
Vehicle weight: 700g
Long * Width * Height: 235 * 146.8 * 64 Unit: mm
Minimum ground distance: 16mm
Minimum turning radius: 45cm
Speed type: 371 photoelectric speed, 371 Hall speed
Duration: more than 60 minutes
Overview:
The steering mechanism of the servo steering car chassis is different from that of a typical chassis. It uses a rear-wheel motor drive with a front steering mechanism to achieve the car's forward, backward, and left and right turns, while a chassis without a steering structure usually uses a left-right differential steering structure. Similar to professional remote control racing car principles, the steering part uses two pull rods connected to the servo to control the car's left and right turns. It has only one motor and an integral die-cast aluminum fixing piece that tightly engages the motor with the transmission shaft. The transmission shaft has two flanged bearings to ensure that the motor rotates more flexibly. There are two acrylic plates on top that can be used to fix accessories such as the main board, motor drive, and battery.
Shipping Method
The car chassis is shipped as loose pieces and requires self-installation upon receipt. The packaging box (size 30 * 20 * 4.5cm weight 750g).
Specifications
- Dimensions: 250 * 148 * 64mm
- Product weight: 700g
- Max load capacity: 1500g
- Ground clearance: 14mm
- Turning radius: 450mm
- Operating voltage: 6-12v
- Motor speed: 10000rpm
- Reduced speed: 310rpm
- Gearbox speed ratio: 1:18.9 / 1:61.2
- Rated current: 0.65A
- Motor power: 2.5w
- Reference speed: 1.2m/s @9v
- Drive system: Ackermann steering, front-wheel steering, rear-wheel drive
- Servo voltage: 4.5-6v
- Drive current: 400-800mA
Rated voltage (V) | Rated speed (rpm) | Load current (A) | Rated torque (kg.cm) | Rated power (W) | Stall current (A) | Vehicle speed (m/s) |
---|
8.4 | 330 | 0.7 | 1.5 | 5 | 4 | 1.6 |
12 | 495 | 0.9 | 2.8 | 8 | 6 | 2.3 |
Precautions
- This product does not have waterproof function, and it is strictly prohibited to use in water or damp environments.
- Short circuit between positive and negative poles is prohibited.
- Obtain information through email.