Lencsével fókuszálható, TCS230 TCS3200D Color Sensor
Színérzékelő modul, szín érzékelő
Cikkszám:
#5345
100% magyar cég!
100% magyar raktár!
(Bruttó) Ár: 
6,990
Ft
Raktáron
TTCS3200 Color Recognition Sensor module is designed based on TCS3200 Color sensor chip that can convert light intensity to frequency. The TCS3200 chip is composed a matrix of 8x8 = 64 photodiode. These 64 photodiodes are divided into 4 groups: 16 photodiodes in each group. Each group of photodiodes is covered by a color filter of the three basic colors (RED, green and blue) and the fourth group is covered with clear filter.
So here is the working theory of the color sensor: since any color is basically made of the three primary colors (red-green-blue) that is mixed together in different ratios. So each of the photodiodes 3 groups will detect the intensity of the color that can pass through the filter (either red or blue or green). Therefore, the sensor analyzes the color into its primary colors, and this way the actual color of the object can be detected easily.

TCS3200color sensor is suitable for colorimeter measurement applications, such as color printing, medical diagnosis, computer color monitor calibration, and industrial process control based on object colors and color coordination of paints, textiles, cosmetics and printed materials.
Features
- Power Supply: 3-5V
- Focusable lens provides a sharply-defined field of view and increase detection distance
- High-Resolution Conversion of Light Intensity to Frequency
- The optimum distance between the TCS3200 and the tested object is 2cm
- Dimension: 3cm x 2.7cm

Color sensor TCS3200 Arduino tutorial
TCS3200 Datasheet
Documentation on this page. (Sample Code, Wiring, Circuit)
- On-board the TCS3200 color sensor
- With removable wide-angle lens, can identify a large area or a small area of the object.
- Support 3V-5V voltage input
- Chip pin all already leads pin standard 100mil (2.54mm), convenient for dot matrix board design
- With four bright white LED can illuminate the object which does not emit light itself. Controllable light-emitting tube.
- S1 S2 S3 S4 can be the pull-up or pull-down resistors on board.
- Two 3mm mounting screw holes spacing 16.5mm
- Screw diameter of the lens is 12mm.
- PCB Size: 23mm X 30mm
Kapcsolódó termékek
Kapcsolódó cikkek
Vélemények (küldje be Ön is véleményét)
Figyelem, a képek csak illusztrációk, a kiegészítők, a színek és a csomagolás eltérhet.
A termékleírásban esetlegesen előforduló hibákért felelősséget nem vállalunk. Ha a paraméterekben nem biztos, ellenőrizze a gyártónál.