Scription:
Brand:CSDWELL
Manufacturer Model:CSD-046
Max Charging Input Voltage :Cell Rated Voltage×N (N for Series Cells Number)
Max Charging Current: Unlimited (Current from super capacitor)
Max Discharging Current: Unlimited (Current from super capacitor)
Min Discharging Voltage: 0.1V
Cell Balanced Starting Voltage:
Part Number: PCM2V5CGHB046S:2.45V±0.03 (Used for 2.5V Caps Balance Board)
Part Number: PCM2V7CGHB046S:2.65V±0.03 (Used for 2.7V Caps Balance Board)
Part Number: PCM2V85CGHB046S:2.8V±0.03 (Used for 2.85V Caps Balance Board)
Part Number: PCM3VCGHB046S2.95V±0.03 (Used for 3.0V Caps Balance Board)
Cell Balance Trigger Display: LED Light
Cell Balanced Current:≤1A
ESR(DC):1mΩ
Operating Temperature range:-40℃~85℃
Storage Temperature range:-40℃~85℃
Weight (g):80
Size L*W(mm):140×88.5
PCB Material:FR-4
Typical Application:
650F Super Capacitor
1200F Super Capacitor
1500F Super Capacitor
2000F Super Capacitor
3000F Super Capacitor
3400F Super Capacitor
Logic outputs:
A single open collector logic output is available for overvoltage monitoring. This output will indicate if any cell in the module has gone into an overvoltage condition. In addition, the output of the NTC thermistor is also available for module temperature monitoring. The overvoltage signal and temperature signal are available via the connector supplied with the module.
The Overvoltage Alarm will be asserted if any individual cell goes into an over voltage condition.
The TEMP output is via a NTC thermistor and can be measured between pin 4 and pin 1 (GND) of the connector. The resistance of the thermistor varies with temperature to provide the actual temperature of the module. The thermistor is located in the center of the module. Under normal operating conditions the temperature output should represent the module’s hottest location.
Package Included:
1×CSD-046 Capacitor Balancing Board
1×10K NTC Resistance
1×Molex-43045 20 Pin Shell Cable