Ventilátor hőfokszabályzó
PWM four-wire Fan Temperature Speed Controller Board
Cikkszám:
#5190
100% magyar cég!
100% magyar raktár!
    3,490
Ft
   
(Bruttó) Ár: 
2,990
Ft
(Bruttó) Ár: |
3,490 Ft
|
|
2,990 Ft |
Raktáron
Kézi beállítású 3 csatornás hőfokszabályzó ventilátorokhoz
Fan1 fordulatszáma hőmérséklettől függ, Fan2 és Fan3 sebessége potméterrel állítható.
The 5-way mode selection switch, if the first selector –TFL – is ON, then duty cycle of the control signal for FAN1 connector is in 40%-100% range, else it will be in 20%-100% range.
The BF1 and BF2 selectors are for enabling/disabling the fan-stall alarm feature. If enabled, the fan-stall alarm will raise an alert (onboard LED will flash as well) when the fan speed falls below 700-800RPM.
Specifications:
Working voltage:DC12V
Circuit load capacity: maximum current per output 5A, the bus currents up 9A
Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON)
The second channel and the third channel 10% -100%
(Note: Above range only for PWM range, the actual control effect will vary depending on the fan.)
Temperature probe parameters: 50K B = 3950
Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
Stall alarm minimum speed: 700-800 rpm
Kapcsolódó termékek
Kapcsolódó cikkek
Vélemények (küldje be Ön is véleményét)
Figyelem, a képek csak illusztrációk, a kiegészítők, a színek és a csomagolás eltérhet.
A termékleírásban esetlegesen előforduló hibákért felelősséget nem vállalunk. Ha a paraméterekben nem biztos, ellenőrizze a gyártónál.