Dual dupla 2 csatornás H-Bridge meghajtó, DC motor vezérlő
0-36V , 15A folyamatos, Peak 60A csúcs terhelésben
Rendkívül alacsony belső ellenállású MOSFET meghajtás, így kis hőveszteség, erős fékezés, és visszatöltés is lehetséges.
Leírás
The drive performance of non-L298 to the motor driver chips can not match, the drive focuses on current and efficiency, and effective motor power and battery life. Able to withstand high current overload, the maximum current up to 110A.
This drive also has a brake function can be quickly stopped the motor, brake quickly, braking significantly, to implement this feature easy to operate.
This drive uses two half-bridge driver IC + N-channel MOSFET is composed of very low internal resistance. Complete two half-bridge driver chip drive the MOSFET switching losses to a minimum. Improve the utilization of power.
MOSFET driver chip comes with hardware brake function and power feedback function.The drive is better than the headroom of the integrated power chip program and other half-bridge combinations, timing coordination complex problems and complementarity-driven.
Control signal:
l The motor is transferred: DIR = 1 PWM = PWM
l Motor Reverse: DIR = 0 PWM = PWM
l Parking brake: DIR = X PWM = 0
l Motor and power connections
l Then the power of positive POWER, GND for negative one. Two motors were connected MOTOR1, MOTOR2
Specifikáció:
l Rated voltage: 3v-36v
l Onboard 5V feszültségkonvertálás (fel és le is, switching dc-dc) a szabályzó logikának és kimenetnek max 1.5A-ig
l Rated current: 10A, megfelelő hűtéssel 15A
l Peak Current: 60A csúcsban
l Használat: Robot autók, járművek, RC, egyetemi projektek, Sokféle DC motor meghajtás
l Méret: length 11cm, width 5.8cm
l Működési hőmérséklet: -30~+75 centigrade
Felhívjuk a figylemet, hogy túlterhelésből fakadó, vagy más szakszerűtlen beavatkozás következtében keletkező meghibásodás miatt, a garanciális kötelezettségünk megszűnik!