Rendkívül kis méretű DC-DC fel-konvertáló, egyszerű csupán 3 lábas használatra (Vout, Gnd, Vin).
Ez a Boost konverter kiválóan alkalmas pl elemes, akkus (pl NiCd NiMh), gombelemes működésre is, kisebb napelemekhez stb..
Rendkívül kis méretű plug-in modul, 3 pines csatlkozóval egyből nyákba dugható csatlakozóba (hüvelysorba), vagy panelbe forrasztva is szabvány 2.54mm-es raszteses lábtávba.
Kiváló alkalmazási területe 1-3 cellás elemes vagy működésekre, szárazelemekhez, NiCd vagy NiMh akkukhoz, vagy 1 cellás Lítiumos (LiPo vagy LiIon vagy LiFePo4) akkukhoz is, rendkívül kicsi készenléti fogyasztással.
Használható akár gombelemekkel, vezetéknélküli és rádiós megoldásokhoz is.
Külön rendelhető nálunk forrasztott tüskesoros plug-in modulként dupont kábelhez vagy forrasztáshoz, és tüskesor nélkül is pl kábel forrasztható: #7842 és #3778 cikkszámokkal.
Description: Input voltage 0.9 ~ 5V, output 5V
Maximum output current: 500 MA,
Start Voltage 0.9V, Output Current 10MA
INPUT 1-1.5V, OUTPUT 5V 50-110MA;
INPUT 1.5-2V, OUTPUT 5V 110-160MA;
INPUT 2-3V, OUTPUT 5V 160-400MA;
INPUT above 3V, OUTPUT 5V 400-500MA;
DC-DC Boost module working frequency 180KHZ.
efficiency is normal 85% .
Operating ambient temperature : -25~+85 Degrees Celsius
2.54mm pin pitch,Arduino UNO Breadboard friendly.
Excluding Pin Size 11mm x 10.5mm x 7.5mm(Very small)Weight : about 1.2g(Very light)
Applications:
①Battery powered equipment
②Wirels Module, NRF24L01 CC1101 CC2500 SI4432 etc.
③Development Board,FPGA/CPLD Arduino 8051 AVR STC etc.
④Arduino Breadboard Raspberry Pi
⑤VCR
⑥PDA
⑦LED Lighting
⑧Wireless communication equipment
⑨MP3/MP4 player
⑩Audio equipment Attention :
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself