Boost DC-DC Converter Power Supply Step-up Module
Ajánlott felhasználás pl: 12V -> 24V/48V, pl. akkutöltés korláztozva, korlátolt áramú felhasználás, erősebb notebook tápegység különböző bemeneti akkukra , széles kimeneti tartomány
A bemeneten szabvány DC csatlakozó aljzattal is, pl 12V-os adapterekhez, ill. sorkapoccsal is ellátva
bemenet: 10-60V
kimenet: 12-80V
abs. max teljesítmény: 600W
hatásfok: max 95%
Nagy hűtőbordával ellátva, működés közben biztosítani kell a szabad légáramlást. Ventillátoros hűtés is ajánlott nagyobb teljesítménynél. Hűtőborda mérete: 5mm, 21mm x 85mm x 63mm. Integrált dizájn, megfelelően elhelyezett bordával, könnyű felszerelhetőség távtartókkal.
Toroid 27mm-es, 1mm-es dupla vezetékkel, jó minőségű szűrő kondenzátorokkal: 1000uF63V electrolytic capacitor, the output two 470uF100V electrolytic capacitors. On-board power supplyi switch, visszajelzés.
Állítható potméterek: kimeneti feszültség, kimeneti áram korlátozás.
Specification:
Input voltage: 10V-60V
Input Current: Maximum input current 15A
Output voltage: 12V-80V continuously adjustable
Output Current: Maximum output current 10A (adjustable)
Output power: effective power P = input voltage V * 10A
Conversion efficiency: Up to 95% (input voltage and current; output voltage and current affect the conversion efficiency)
Short circuit protection: fuse
Size:85x63x64mm
Weight:200g
Applications:
1. DIY an output adjustable vehicle power supply, you only need access to 12V power input, the output voltage can be (14V-80V) continuously adjustable freely, but the output voltage can not be lower than the input voltage.
2. universal car laptop power supply. 12V power input connected to the output of the voltage regulator into a notebook need to work.
3. Boost charger, you can use 12V power supply higher than 12V battery charging, for example, 24V battery, and the charging current can be adjusted.
4. electronic equipment power supply, as long as the voltage regulator to the desired voltage and current does not exceed the rated current can all be working properly.
5. before the system-level power supply, when doing a project, the input is 10V-18V, 24V or so the system board requires power supply and the power is large, ordinary DC-DC module power is too small, then the module will be your best choice, without debugging directly on the machine can work, easy to do high-efficiency power boost.
Felhívjuk a figylemet, hogy túlterhelésből fakadó, vagy más szakszerűtlen beavatkozás következtében keletkező meghibásodás miatt, a garanciális kötelezettségünk megszűnik!